Fiber Optic Patch Cables What You Need to Know
The primary term “patch cable” is an electronic cable that connects electronic devices. They allow the transfer of information between them. There are a variety of fiber optic patch cables available on the market, with fiber optic cables being among the kinds. Other varieties include microphones headphones RCA as well as ethernet.
The fiber optic patch cables also known as cord also referred to as an optical jumper is cable that is terminated by fiber optic connectors (LC, SC, MTRJ, ST, and more) at both ends. These connectors permit the cable to remain in contact with an optical switch or other computer devices. They are perfect for use indoors in medical imaging centers, data centers mechanical engineering, LAN-related applications, cable TV networks, telephone lines, and many more.
If you’re looking to purchase a fiber optic jumper to connect your system, you need to be aware of the types and functions. Then, you can choose based on your needs.
Let’s get started!
Armored fiber optic patch cables
This is more durable than regular fiber Optic Patch Cables and contains all the attributes. It is resistant to adult steps and also anti-rodents. It’s as flexible as the standard fiber patch cord.
Bend Insensitive Fiber Patch Cord: It is resistant to bend-related damages. It has a very small bend radius, and also prevents further damage to bends due to its innovative design. Also, due to its very low macro-bending sensitivity. It is compatible with data centers, FTTH applications, and high-density cabling which must be fixed and wrapped to the corners.
Mode Conditioning Fiber Patch Cable It’s a dual multimode fiber optic patch cable that includes a short distance of fiber that is single-mode near the beginning of the length of transmission. We design it to resolve technical issues that arise in the use of single-mode equipment in the multimode fiber plant. The primary goal is to expand the distance of the fiber plant far beyond its initial uses and to enhance the quality of data signal.
Low Injection Low Loss Fiber Patch Cables
It resembles typical fiber Optic Patch Cables based on its appearance. But the connectors on its ends have a lot less loss of insertion.
Uniboot Fiber Patch Cable The fiber Optic Patch Cables terminates using specially-designed LC Uniboot connectors. The fiber patch cable connects two fibers into a single cable, which provides superior performance in the high-density cabling environments. It can reduce the number of cables by 50 percent. It is the ideal choice for areas with the need for more space.
The Switchable Fiber Patch Cable: This fiber Optic Patch Cables allows for quick changing of polarity in the field without the need for special equipment or any additional training. Its compact design makes it ideal for use in tight spaces. the switchable fiber patch cord contributes to more efficient management of cables in high-density settings.
This is how to choose the right fiber Optic Jumper:
Step 1: Select The Correct Connector Type
The ends of the fiber optic patch cords have different connectors, including LC as well as SC. ST and FC. They also have MPO and MTP. Be aware that these connectors design for various devices. If you wish to connect the same ports devices, choose connectors with similar connectors on both ends like MPO-MPO, LC-LC, SCSC-SC. If you are looking to connect different types of ports devices, LCSC, LCST or LC-FC cables may be useful.
Step 2: Think About The Mode
The fiber Optic Patch Cables are available in two kinds of modes: Single-mode as well as multimode. Single-mode patch cords are great for data transmission over long distances. If you’re looking for less distance, Multimode Fiber Optic patch cord might be the best option.
Step 3: Simplex Or Duplex Cable?
Simplex refers to that the fiber Optic Patch Cables is one piece of glass or fiber. It uses when there is only one send or receive line is required between two devices. Duplex refers to that two cables of fiber placed in parallel to make common transceivers. Duplex cable types contain two strings of glass or plastic as opposed to the simpler cable.
Step 4: Choose the Right Cable Length
These cables come in different length. They range from 0.5m up to 50m. It is crucial to choose a length that is in line with how far between devices that you would like to connect.
Step 5 Connector Polish Type
The connectors have two types that are available. APC UPC and UPC. APC connectors can use for use in FTTx as well as passive optical networks and wavelength-division-multiplexing. But, they have higher price than UPC connectors. For systems that are less sensitive to digital, UPC connects would be perfect.
Step 6: Select The Type of Cable Jacket
There are three types of jackets of fiber Optic Patch Cables : Polyvinyl chloride (PVC), low smoke zero halogen and Optical fiber nonconductive.
- PVC is perfect for horizontal runs that extend from to the center of wiring.
- LSZH is a good choice between floors in residential or commercial structures.
- OFNP is ideal for vertical runs between floors as well as other purposes.
Fiber products come with a vast variety of fiber optic jumpers with a range of connectors, lengths, and different types of cable. The key is to take note of your main need and select the right cable for your needs to get the most value of it. Read more.